Details

Title

Methanol as a High Purity Hydrogen Source for Fuel Cells: A Brief Review of Catalysts and Rate Expressions

Journal title

Chemical and Process Engineering

Yearbook

2017

Volume

vol. 38

Issue

No 1

Authors

Keywords

copper catalysts ; noble metal catalysts ; fuel cell ; hydrogen production ; CO-PROX

Divisions of PAS

Nauki Techniczne

Coverage

147-162

Publisher

Polish Academy of Sciences Committee of Chemical and Process Engineering

Date

2017.03.30

Type

Artykuły / Articles

Identifier

DOI: 10.1515/cpe-2017-0012 ; ISSN 0208-6425

Source

Chemical and Process Engineering; 2017; vol. 38; No 1; 147-162

References

Lachowska (2010), Steam reforming of methanol over Cu Ga catalyst - effect of the reduction conditions on the catalytic performance, Reac Kinet Mech Cat, 101, doi.org/10.1007/s11144-010-0213-z ; Wang (2008), Preferential oxidation of CO in rich stream over Au - Co catalysts, Catal Commun, 9, doi.org/10.1016/j.catcom.2007.12.017 ; Takezawa (1997), Steam reforming and dehydrogenation of methanol : Difference in the catalytic function of copper and group VIII metals, Catal Today, 36, doi.org/10.1016/S0920-5861(96)00195-2 ; Papavasiliou (2009), Steady - state isotopic transient kinetic analysis of steam reforming of methanol over Cu - based catalysts, Appl Catal B Environ, 88, doi.org/10.1016/j.apcatb.2008.10.018 ; Momirlan (2005), The properties of hydrogen as fuel tomorrow in sustainable energy system for a cleaner planet, Int J Hydrogen Energ, 30, doi.org/10.1016/j.ijhydene.2004.10.011 ; Rameshan (2012), CO - selective methanol steam reforming on In - doped Pd studied by in situ - ray photoelectron spectroscopy, Catal, 295, doi.org/10.1016/j.jcat.2012.08.008 ; Patel (2006), Influence of preparation method on performance of Cu - alumina catalysts for the hydrogen production via steam reforming of methanol, Porous Mat, 13, doi.org/10.1007/s10934-006-8033-2 ; Lachowska (2004), Reforming metanolu parą wodną na katalizatorze miedziowo - cynkowo - cyrkonowym modyfikowanym Ga , Mn oraz Mg, Inż Chem Proc, 25. ; Dudfield (2001), A carbon monoxide PROX reactor for PEM fuel cell automotive application, Int J Hydrogen Energ, 26, doi.org/10.1016/S0360-3199(00)00131-2 ; Mastalir (2005), Steam reforming of methanol over Cu catalysts : a kinetic study, Appl Catal AGen, 230, doi.org/10.1016/j.jcat.2004.12.020 ; Purnama (2004), CO formation / selectivity for steam reforming of methanol with a commercial CuO catalyst, Appl Catal A Gen, 259, doi.org/10.1016/j.apcata.2003.09.013 ; Kung (2003), Supported Au catalysts for low temperature CO oxidation, Catal, 216, doi.org/10.1016/S0021-9517(02)00111-2 ; Lee (2004), Methanol steam reforming Cu catalyst : kinetics and effectiveness factor, Appl Catal A Gen, 278, doi.org/10.1016/j.apcata.2004.09.022 ; Samms (2002), Kinetics of methanol - steam reformation in an internal reforming fuel cell, Power Sources, 112, doi.org/10.1016/S0378-7753(02)00089-7 ; Korotkikh (2000), Selective catalytic oxidation of CO in Fuel cell applications, Catal Today, 62, doi.org/10.1016/S0920-5861(00)00426-0 ; Spivey (2005), Catalysis in the development of clean energy technologies, Catal Today, 100, doi.org/10.1016/j.cattod.2004.12.011 ; Santacesaria (1983), Kinetics of catalytic steam reforming of methanol in a CSTR reactor, Appl Catal, 5, doi.org/10.1016/0166-9834(83)80162-6 ; Margitfalvi (2004), Modification of Au / MgO catalysts used in low temperature CO oxidation with Mn and Fe, Appl Catal A Gen, 272, doi.org/10.1016/j.apcata.2004.05.035 ; Idem (1996), Characterization studies of calcined , promoted and non - promoted methanolsteam reforming catalysts, Can J Chem Eng, 74, doi.org/10.1002/cjce.5450740214 ; Agrell (2001), Production of hydrogen by partial oxidation of methanol over Cu / ZnO catalysts prepared by microemulsion technique, Appl Catal A Gen, 211, doi.org/10.1016/S0926-860X(00)00876-0 ; Agrell (2002), Steam reforming of methanol over a Cu catalyst : A kinetic analysis and strategies for suppression of CO formation, Power Sources, 106, doi.org/10.1016/S0378-7753(01)01027-8 ; Wang (2007), Production of hydrogen by steam reforming of methanol over Cu / ZnO catalysts prepared via a practical soft reactive grinding route based on dry oxalate - precursor synthesis, Catal, 246, doi.org/10.1016/j.jcat.2006.12.006 ; Gu (2014), Ordered mosorporous Cu catalysts for CO preferential oxidation in - rich gasees : Influance of copper content and pretreatment conditions, Appl Catal, 152, doi.org/10.1016/j.apcatb.2014.01.011 ; Navarro (2002), Production of hydrogen by partial oxidation of methanol over a Cu catalyst : Influence of the initial state of the catalyst on the start - up behaviour of the reformer, Catal, 212, doi.org/10.1006/jcat.2002.3764 ; Di Benedetto (2013), Role of CO on CO preferential oxidation over CuO catalyst, Appl Catal B Environ, 142, doi.org/10.1016/j.apcatb.2013.05.001 ; Matsumura (2013), Development of durable copper catalyst for hydrogen production by high temeperature methanol steam refo, rming Int J Hydrogen Energ, 38, doi.org/10.1016/j.ijhydene.2013.08.066 ; Liu (2008), Waste - free soft reactive grinding synthesis of high - surface - area copper - manganese spinel oxide catalysts highly effective for methanol steam reforming, Catal Lett, 121, doi.org/10.1007/s10562-007-9311-6 ; Lopez (2012), Hydrogen production from oxidative steam reforming of methanol : Effect of the Cu and Ni impregnation on and their molecular simulation studies, Int J Hydrogen Energ, 37, doi.org/10.1016/j.ijhydene.2012.02.105 ; Yong (2013), Review of methanol steam reforming - Cu - based catalysts , surface reaction mechanisms , and reaction schemes, Int J Hydrogen Energ, 38, doi.org/10.1016/j.ijhydene.2013.03.023 ; Alejo (1997), Partial oxidation of methanol to produce hydrogen over Cu - Znbased catalysts, Appl Catal A Gen, 162, doi.org/10.1016/S0926-860X(97)00112-9 ; Liu (2003), Steam reforming of methanol over Cu catalysts studied in comparison with Cu / ZnO and Cu catalysts, Top Catal, 22, doi.org/10.1023/A:1023519802373 ; Sá (2010), Catalysts for methanol steam reforming - A review, Appl Catal B Environ, 99, doi.org/10.1016/j.apcatb.2010.06.015 ; Avgouropoulos (2002), A comparative study of Pt / , Au / α and CuO catalysts for the selective oxidation of carbon monoxide in excess hydrogen, Catal Today, 75, doi.org/10.1016/S0920-5861(02)00058-5 ; Agrell (2003), Production of hydrogen by partial oxidation of methanol over ZnO - supported palladium catalysts prepared by microemulsion technique, Appl Catal A Gen, 242, doi.org/10.1016/S0926-860X(02)00517-3 ; Chang (2006), Hydrogen production by partial oxidation of methanol over gold catalysts supported on TiO Co Zn ) composite oxides, Appl Catal A Gen, 302, doi.org/10.1016/j.apeata.2005.12.028 ; Amphlett (1985), Hydrogen production by the catalytic steam reforming of methanol Part : Kinetics of methanol decomposition using girdler catalyst, Can J Chem Eng, 66, doi.org/10.1002/cjce.5450630412 ; Mastalir (2007), Steam reforming of methanol over Cu modified with hydrotalcites, Catal Commun, 8, doi.org/10.1016/j.catcom.2007.01.031 ; Dodds (2015), Hydrogen and fuel cell technologies for heating : A review, Int J Hydrogen Energy, 40, doi.org/10.1016/j.ijhydene.2014.11.059 ; Jiang (1993), Kinetic mechanism for the reaction between methanol and water over a Cu catalyst, Appl Catal A Gen, 97, doi.org/10.1016/0926-860X(93)80081-Z ; Hung (2011), Steam reforming of methanol over copper - yttria catalyst supported on praseodymium - aluminum mixed oxides, Catal Commun, 12, 1389, doi.org/10.1016/j.catcom.2011.05.022 ; Peppley (1999), Methanol - steam reforming on Cu catalysts Part : A comprehensive kinetic model, Appl Catal A Gen, 179, doi.org/10.1016/S0926-860X(98)00299-3 ; Wu (2009), The role of the promoters in Cu based catalysts for methanol steam reforming, Catal Lett, 130, doi.org/10.1007/s10562-009-9847-8 ; Snytnikov (2012), Catalysts for hydrogen production in a multifuel processor by methanol , dimethyl ether and bioetanol steam reforming for fuel cell applications, Int J Hydrogen Energ, 37, doi.org/10.1016/j.ijhydene.2012.02.116 ; Shishido (2004), Active Cu / ZnO and Cu catalysts prepared by homogeneous precipitation method in steam reforming of methanol, Appl Catal A Gen, 263, doi.org/10.1016/j.apcata.2003.12.018 ; Liu (2013), Improvement of catalytic performance of preferential oxidation of CO in - richgases on three - dimensionally ordered macro - and mesoporous Pt - Au catalysts -, Appl Catal B Environ, 142, doi.org/10.1016/j.apcatb.2013.06.002 ; Purnama (2004), Activity and selectivity of a nanostructured CuO catalyst in the steam reforming of methanol, Catal Lett, 94, doi.org/10.1023/B:CATL.0000019332.80287.6b ; Jiang (1993), Kinetic study of steam reforming of methanol over copper - based catalysts, Appl Catal A Gen, 93, doi.org/10.1016/0926-860X(93)85197-W ; Liu (2004), Preferential oxidation of CO in over CuO catalysts, Catal Today, 93, doi.org/10.1016/j.cattod.2004.06.049 ; Yao (2006), Effect of preparation method on the hydrogen production from methanol steam reforming over binary Cu catalysts, Appl Catal A Gen, 297, doi.org/10.1016/j.apcata.2005.09.002 ; Takahashi (1982), The mechanism of steam reforming of methanol over a coppersilica catalyst, Appl Catal, 2, doi.org/10.1016/0166-9834(82)80154-1 ; Papavasiliou (2007), Combined steam reforming of methanol over Cu - Mn spinel oxide catalysts, Catal, 251, doi.org/10.1016/j.jcat.2007.07.025 ; Cubeiro (1998), Selective production of hydrogen by partial oxidation of methanol over ZnOSupported palladium catalysts, Catal, 179, doi.org/10.1006/jcat.1998.2184 ; Park (2015), Compact design of oxidative steam reforming of methanol assisted by blending hydrogen peroxide, Int J Hydrogen Energ, 40, doi.org/10.1016/j.ijhydene.2015.07.084 ; Tesser (2009), Methanol steam reforming : A comparison of different kinetics in the simulation of a packed bed reactor, Chem Eng J, 154, doi.org/10.1016/j.cej.2009.06.007 ; Monte (2014), Preferential oxidation of CO in excess over CuO catalysts : Performance as a function of copper coverage and exposed face present in the support, Catal Today, 229, doi.org/10.1016/j.cattod.2013.10.078 ; Pojanavaraphan (2012), Hydrogen production by oxidative reforming of methanol over Au catalysts, Chem Eng J, 192, doi.org/10.1016/j.cej.2012.03.083 ; Urasaki (2005), Hydrogen production via steam - iron reaction using iron oxide modified with very small amounts of palladium and zirconia, Appl Catal A Gen, 288, doi.org/10.1016/j.apcata.2005.04.023 ; Barton (1980), Kinetics of catalytic conversion of methanol at higher pressures, Collect Czech Chem Commun, 45. ; Pojanavaraphan (2014), Effect of support composition and metal loading on Au - xZrxO catalysts for the oxidative steam reforming of methanol, Chem Eng J, 2, 240, doi.org/10.1016/j.cej.2013.11.062 ; Maeda (2008), Performance of Pt Fe mordenite monolithic catalysts for preferential oxidation of carbon monoxide in a refor - mate gas for PEFCs, Appl Catal A Gen, 341, doi.org/10.1016/j.apcata.2008.02.022 ; Geissler (2001), Autothermal methanol reforming for hydrogen production in fuel cell applications, Phys Chem Chem Phys, 3, doi.org/10.1039/b004881j ; Kim (2009), Preferential CO oxidation over supported noble metal catalysts, Catal Today, 146, doi.org/10.1016/j.cattod.2009.01.045 ; Matsumura (2013), Stabilization of Cu catalyst for methanol steam reforming to hydrogen by coprecipitation on zirconia support, Power Sources, 238, doi.org/10.1016/j.jpowsour.2013.03.074 ; Tang (2014), Efficient fabrication of active CuOCeO catalysts for preferential oxidation of CO by solid state impregnation, Appl Catal B Environ, 146. ; Cheng (2012), Zu Effect of on steam reforming of methanol over CuO catalysts, Chem Eng J, 192, doi.org/10.1016/j.cej.2012.03.063 ; Tanaka (2003), Catalytic performance of - promoted Rh / USY catalysts in preferential oxidation of CO in rich hydrogen, Appl Catal A Gen, 250, doi.org/10.1016/S0926-860X(03)00320-X ; Matsumura (2014), Durable Cu composite catalyst for hydrogen production by high temperature methanol steam reforming, Power Sources, 272, doi.org/10.1016/j.jpowsour.2014.09.047 ; Huang (2009), Steam reforming of methanol over CuO catalysts, Appl Catal A Gen, 358, doi.org/10.1016/j.apcata.2009.01.031 ; Ilinich (2013), Kinetics of methanol steam reforming with a Pd catalyst under realistic operating conditions of a portable reformer in fuel cell applications, Ind Eng Chem Res, 52, doi.org/10.1021/ie301606w ; Lindström (2002), Activity and characterization of Cu Cr and Cu / Zr on γ - alumina for methanol reforming for fuel cell vehicles, Appl Catal A Gen, 234, doi.org/10.1016/S0926-860X(02)00202-8

Editorial Board

Editorial Board

Ali Mesbach, UC Berkeley, USA

Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland

Anna Trusek, Wrocław University of Science and Technology, Poland

Bettina Muster-Slawitsch, AAE Intec, Austria

Daria Camilla Boffito, Polytechnique Montreal, Canada

Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland

Dorota Antos, Rzeszów University of Technology, Poland

Evgeny Rebrov, University of Warwick, UK

Georgios Stefanidis, National Technical University of Athens, Greece

Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland

Johan Tinge, Fibrant B.V., The Netherlands

Katarzyna Bizon, Cracow University of Technology, Poland

Katarzyna Szymańska, Silesian University of Technology, Poland

Marcin Bizukojć, Łódź University of Technology, Poland

Marek Ochowiak, Poznań University of Technology, Poland

Mirko Skiborowski, Hamburg University of Technology, Germany

Nikola Nikacevic, University of Belgrade, Serbia

Rafał Rakoczy, West Pomeranian University of Technology, Poland

Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong

Tom van Gerven, KU Leuven, Belgium

Tomasz Sosnowski, Warsaw University of Technology, Poland



×