Science and earth science

Archives of Mining Sciences

Content

Archives of Mining Sciences | 2018 | vol. 63 | No 2 |

Download PDF Download RIS Download Bibtex

Abstract

It is meaningful to study the issues of CO migration and its concentration distribution in a blind gallery to provide a basis for CO monitoring and calculation of fume-drainage time, which is of a great
Go to article

Authors and Affiliations

Yang Cao
Hongguang Ji
Yuezheng Zhang
Song Li
Download PDF Download RIS Download Bibtex

Abstract

The hereby paper is devoted to the analysis of operational properties of vibratory conveyors, which principle of operations is based on the Frahm’s dynamic elimination effect (Den Hartog, 1971). These
Go to article

Authors and Affiliations

Jerzy Michalczyk
Marek Gajowy
Download PDF Download RIS Download Bibtex

Abstract

The paper presents a new method for measuring the strain and load of wire ropes guide using fiber
Go to article

Authors and Affiliations

Janusz Juraszek
Download PDF Download RIS Download Bibtex

Abstract

The geodetic measurements optimization problem has played a crucial role in the mining areas affected by continuous ground movement. Such movements are most frequently measured with the
Go to article

Authors and Affiliations

Ryszard Hejmanowski
Agnieszka Malinowska
Artur Guzy
Wojciech Tomasz Witkowski
Download PDF Download RIS Download Bibtex

Abstract

Lower Carboniferous limestone has been extracted in the “Czatkowice” open-pit hill-slope quarry in
Go to article

Authors and Affiliations

Jacek Motyka
Kajetan d'Obyrn
Agata Kasprzak
Andrzej Szymkiewicz
Download PDF Download RIS Download Bibtex

Abstract

To solve the problem of large deformation soft rock roadway with complicated stress condition in Baluba copper mine, the characteristics of roadway deformation and failure modes are analyzed deeply on
Go to article

Authors and Affiliations

Aixiang Wu
Shunman Chen
Yiming Wang
Xun Chen
Download PDF Download RIS Download Bibtex

Abstract

The article presents the results of tests on SHC-40 hydraulic props equipped with two types of valve blocks: standard (with spring steel cylinder) and BZG-2FS (with gas spring). The research was conducted
Go to article

Authors and Affiliations

Andrzej Pytlik
Download PDF Download RIS Download Bibtex

Abstract

Sensitivity analysis of the dynamic response of both the designed and the actual models of a slewing superstructure with two masts to the variation of the counterweight mass and the degree of accuracy of the
Go to article

Authors and Affiliations

Nebojša Gnjatović
Srđan Bošnjak
Aleksandar Stefanović
Download PDF Download RIS Download Bibtex

Abstract

Mining activity influence on the environment belongs to the most negative industrial influences. Land subsidence can be a consequence of many geotectonic processes as well as due to anthropogenic
Go to article

Authors and Affiliations

Vladimir Sedlák
Jaroslav Hofierka
Michal Gallay
Jan Kaňuk

Instructions for authors

General information

It is essential for us that authors write and prepare their manuscripts according to the instructions and specifications listed below. Therefore, authors are strongly encouraged to read these instructions carefully before preparing a manuscript for submission.

Archives of Mining Sciences (AMS) is concerned with original research, new developments and case studies in all fields of mining sciences which include:

- mining technologies,

- stability of mine workings,

- rock mechanics,

- geotechnical engineering and tunnelling,

- mineral processing,

- mining and engineering geology,

- mining geophysics,

- mining geodesy

- ventilation systems,

- environmental protection in mining,

- economical aspects in mining,

- mining machine science.

Papers are welcomed on all relevant topics and especially on theoretical developments, analytical methods, numerical methods, rock testing, site investigation, and case studies.

AMS publishes research and review articles, technical notes.

Papers suitable for publication in AMS are those which:

- contain original work - the main result is not published elsewhere neither by the authors nor somebody else, and is not currently under consideration for publication in any other journal,

- are focused on the core aims and scope of the journal,

- are clearly and correctly written in English.

Authors are required to contribute to the cost of publication – publication charge 1000 PLN or 250 Euro. There is no submission charge.

Electronic submission:

All submissions must be made electronically via Editorial System https://www.editorialsystem.com/editor/amsc/articles/list/?qt=NEW

Language

The papers should be written in English.

Length of paper

The research and review articles may not exceed 16 typewritten pages, technical notes -10 pages, format A4 including figures and tables.

Format

The initial submission should be sent as Microsoft World (Arial, 12 points, line spacing - 1,5) or pdf file with all drawings, pictures and tables placed in the text.

After acceptance the text (in Microsoft Word), figures and tables should be sent as separate files.

Layout of the manuscript

First and last name(s) of the author(s), title of the article, abstract, keywords, methodology and introduction to the topics, results, conclusions, acknowledgements and references. The subtitles should conform to the decimal system of numbering.

Abstracts

The abstract should briefly summarize the most important results reported in the paper (up to 200 words).

Keywords.4-6 keywords

Formulae

Formulae should be prepared with Microsoft Equation, written clearly with distinct notation of upper and lower indices and parentheses, maintaining an uniform numbering.

Tables

Tables should be prepared as separate file in Microsoft World format.

Figures

If possible, the figures should be prepared with a vector graphics software (cdr, wmf, al or dxf formats) or as eps, jpg, bmp (figures width no greater than 13.5 cm). Use Arial font for the comments on drawings in size 6-10 points. The photographs should be converted to high resolution scans in *.jpg or *.tiff format. Figures should be submitted as separate files.

References

A bibliography without numbering, arranged alphabetically according to the author’s last name, should include all positions referring in the text. In case of more than one article from the same year, the articles should be differentiated as follows: 1985a, 1985b, etc. The following order is required: last name and initials of all co-authors, year, title, type of publications, (journal, conference material, collection of monograph articles, unpublished texts) with the page numbers used.

Quoting references

Name(s) of the author(s) should be provided in parentheses. e.g.: (Brandt, 1993), (Crosdale & Beamish, 1994). (Dziurzynski et al., 1990) in the case of one, two or more than two authors, respectively. If the name(s) of the author(s) is included in the text, then the reference should be cited as follows e.g.: „According to Brandt (1993)...”

Example of bibliography.

Brandt, J., 1993. Neuere Erkentnisse auf dem Gebiet der Gasausbruchprognose. Glückauf Forschungshefte 54, 5, 228-233.

Crosdale, P. J., Beamish, B.B., 1994. Methane sorption studies at South Bulli (NSW) & Central (QLD) collieries using a high-pressure microbalance. 28 Newcastle Symposium on „Advances in the study of Sydney Basin”, Newcastle, NSW, Australia, 15-17 April, 118-125.

Dziurzynski, W., Trutwin W., Tracz J., 1990. Symulacja komputerowa przepływu powietrza i gazów powyrzutowych w sieci wentylacyjnej kopalni. J. Litwiniszyn (Ed.), Górotwór jako ośrodek wielofazowy; Wyrzuty skalno-gazowe. Wydawnictwo AGH, Kraków, Vol. II, 743-758.

Lama R. D., Bodziony, J., 1996. Outbursts of gas, coal and rock in underground mines. Publisher Lama & Associates, 130 Brokers Road, Mt. Pleasant, NSW 2519, Australia.

Nekrasovski, Ya. E., 1951. Razrabotka plastov podverzhennykh vnezapnym vybrosam ugla i gaza. Ugletekhizdat, Moskva.

This page uses 'cookies'. Learn more