Search results

Filters

  • Journals
  • Authors
  • Keywords
  • Date
  • Type

Search results

Number of results: 32
items per page: 25 50 75
Sort by:

Abstract

The results and method of measurements of D, H and T carried out at Hornsund in the summer of 1979 are presented. The relative and absolute values of these elements are given in reduction to the Polish magnetic station at Hornsund. An initial evaluation of changes in the magnetic field from 1957 to 1979 is carried out.
Go to article

Abstract

This paper presents the results of magnetic mapping carried out in the area of the metamorphic series of Ariekammen and Skoddefjellet. On the basis of qualitative interpretation of measurements a number of anomalous zones were distinguished, whose position can be correlated with local changes in mineralitation and polymetallic ore content in the Fuglebergsletta area. The SE-NW orientation, skew to the almost meridional run of the layers of slates and marbles making up the metamorphic complex, dominates in the course of the anomalous zones.
Go to article

Abstract

Investigating human emotions empirically is still considered to be challenging, mostly due to the questionable validity of the results obtained when employing individual types of measures. Among the most frequently used methods to study emotional reactions are self-report, autonomic, neurophysiological, and behavioral measures. Importantly, previous studies on emotional responding have rarely triangulated the aforementioned research methods. In this paper we discuss main methodological considerations related to the use of physiological and self-report measures in emotion studies, based on our previous research on the processing of emotionally-laden narratives in the native and non-native language, where we employed the SUPIN S30 questionnaire as a self-report tool, and galvanic skin response (GSR) as a physiological measure (Jankowiak & Korpal, 2018). The findings revealed a more pronounced reaction to stimuli presented in the native relative to the non-native language, which was however reflected only in GSR patterns. The lack of correlation between GSR and SUPIN scores might have resulted from a number of methodological considerations, such as social desirability bias, sensitive questions, lack of emotional self-awareness, compromised ecological validity, and laboratory anxiety, all of which are thoroughly discussed in the article.
Go to article

Abstract

Bartlett’s paradox has been taken to imply that using improper priors results in Bayes factors that are not well defined, preventing model comparison in this case. We use well understood principles underlying what is already common practice, to demonstrate that this implication is not true for some improper priors, such as the Shrinkage prior due to Stein (1956). While this result would appear to expand the class of priors that may be used for computing posterior odds, we warn against the straightforward use of these priors. Highlighting the role of the prior measure in the behaviour of Bayes factors, we demonstrate pathologies in the prior measures for these improper priors. Using this discussion, we then propose a method of employing such priors by setting rules on the rate of diffusion of prior certainty.
Go to article

Abstract

The aim of this paper is to answer the question: Are the Łódź Hills useful for electrical energy production from wind energy or not? Due to access to short-term data related to wind measurements (the period of 2008 and 2009) from a local meteorological station, the measure – correlate – predict approach have been applied. Long-term (1979‒2016) reference data were obtained from ECWMF ERA-40 Reanalysis. Artificial neural networks were used to calculate predicted wind speed. The obtained average wind speed and wind power density was 4.21 ms⁻¹ and 70 Wm⁻¹, respectively, at 10 m above ground level (5.51 ms⁻¹, 170 Wm⁻¹ at 50 m). From the point of view of Polish wind conditions, Łódź Hills may be considered useful for wind power engineering.
Go to article

Abstract

The most popular field methods of measurements of raised marine beach altitudes used by geomorphologists are presented. Compared data from clisimeter routes, altimeter routes and from readings from a photogeological map and directly from air photos compose the profiles. Advantages and disavantages of each method are discussed.
Go to article

Abstract

On the basis of about 12500 depth measurements of which 6700 were taken from r/v Profesor Siedlecki, 1300 from r/v Polarstern and the remainder from British navigation charts, a bathymetric chart of the Bransfield Strait in the scale 1:500 000 has been prepared. Within the assumed boundaries the total area of the Bransfield Strait covers 65308.6 square kilometres, of which the Western Basin covers 23.5%, Central Basin — 47.3%, and Eastern Basin 29.2%. Capacity of the whole Bransfield Strait amounts to 38451 km3 . The average depth of the Bransfield Strait is 592 m.
Go to article

Abstract

The activity of territorial self-government shaped institutionally during the development process is characterized by a significant scope of care for the financial situation, which determines the efficiency of its functioning. The general availability of public services is a condition for the assessment of the activities of municipalities (powiats, voivodeships). Institutional economy as a real one, takes into account an integrated point of view. The aim of the study is to present the territorial differentiation of the eff ectiveness of communes’ activities in the context of institutional economics and to present the possibility of using a synthetic measure in this process. The synthetic measure of development fluctuated within the limits of 0.30 – Wąchock (Starachowice poviat, urban-rural commune) to 0.41 – Ostrowiec Św. (Ostrowiecki poviat, urban commune) in 2009, 0.32 – Łączna (Skarżysko poviat, rural commune) to 0.40 – Starachowice (Starachowice poviat, municipal commune) in 2015. The results of the analysis confirm the existence of small differences in the assessment of development communes of the Kamienna Basin. This approach allows the assessment of municipalities using one size and allows you to organize the analyzed objects in terms of the considered phenomenon.
Go to article

Abstract

Coordinate Measurement Machines (CMMs) have been extensively used in inspecting mechanical parts with higher accuracy. In order to enhance the efficiency and precision of the measurement of aviation engine blades, a sampling method of profile measurement of aviation engine blade based on the firefly algorithm is researched. Then, by comparing with the equal arc-length sampling algorithm (EAS) and the equi-parametric sampling algorithm (EPS) in one simulation, the proposed sampling algorithm shows its better sampling quality than the other two algorithms. Finally, the effectiveness of the algorithm is verified by an experimental example of blade profile. Both simulated and experimental results show that the method proposed in this paper can ensure the measurement accuracy by measuring a smaller number of points.
Go to article

Abstract

A metrological verification of a high precision digital multimeter was made by the laboratory of calibration of programmable electrical multifunction instruments of the National Institute of Metrological Research (INRIM) in order to verify its accuracy and stability. The instrument had been tested for a period of six months for five low-frequency electrical quantities (DC and AC Voltage and Current and DC Resistance). Its stability and precision were compared with the accuracy specifications of the manufacturer. As a new approach, a performance index of the DMM was introduced and evaluated for each examined measurement point. The DMM showed a satisfactory agreement with its specifications to be considered at the level of other top-class DMMs and even better in some measurements points.
Go to article

Abstract

The paper is focused on the main problems of modern metrology in the context of the Fourth Industrial Revolution “Industry 4.0”, particularly in the field of qualimetry. The dominant issues of the methodology of qualimetrical measurement, as the interrelation between metrology and qualimetry, are considered. The following questions are raised and analysed: determination of the measurand in the qualimetrical measurement, creation of the virtual product quality pattern, determination of the product quality level by using the theory of multidimensional scaling, assurance of the metrological traceability of the qualimetrical measurement results. A procedure of performing the qualimetrical measurement is described.
Go to article

Abstract

Four and a half years of African Swine Fever (ASF) in population of free-ranging wild boars and domestic pigs revealed a number of novel insights into the disease epidemiology. Until November 20th, 2018, in total 3048 cases in wild boars and 213 outbreaks in domestic pigs have been confirmed. In spite of low contagiosity as well as low rate of ASF spread in wild boars the disease has an enormous socio-economical impact on the production of pigs in Poland. One of the most important aspects which directly influences the dynamics of ASF spread is the unpredictable hu- man activity. Another important factor responsible for continuous ASF spread is fast recovery of wild boar population in spite of efforts taken by hunters. Assuming our scientific opinion ASF seems to be present in wildlife for the incoming few or several years. Therefore, extraordinary measures should be prepared and undertaken to limit the risk of the occurrence of future out- breaks in domestic pigs. One of the most crucial issues is implementation of strict biosecurity measures in all domestic pigs holdings.
Go to article

Abstract

The efficient protection (support reinforcement) of a wall and heading crossing ensures continuity of the production cycle, and that is a quick moving of the scraper conveyor to the wall. Using low or high bolting as a support reinforcement element in wall and heading crossings allows for the elimination of traditional methods of maintaining longwall-gate crossings, and therefore allows for the efficient use high performance modern wall complexes. The paper presents the long underground experience, of the Knurów–Szczygłowice mine of efficient support wall and heading crossing maintenance, which was bolted to the rock mass with the usage of two pairs of bolts, showing full technical and economical usefulness of this support reinforcement method. The article also highlights work safety and the increasingly common usage of endoscopies when specifying the range of crack areas which directly effects the proper choice in number, load-capacity and length of the used bolts. The underground studies the measurements of the reach of the zones of fracturing and roof stratification (using endoscopes and wire type stratification meters) and the laboratory tests (using the test stand) have allowed to determine the safety factor for maintenance of the longwall gangway crossing, directly resulting in the necessity to install additional reinforcement. The value of the safety factor Sbsc-ch greater than 1 is advantageous and safe, and the value less than or equal to 1 can lead to a significant deterioration of the conditions of maintenance of a wall and heading crossing which was bolted.
Go to article

Abstract

Meteorological conditions at Arctowski Station during 2013–2017 were presented against the background of regional climate changes, especially air temperature decline. Air temperature, relative air humidity, air pressure, solar radiation, wind speed and direction, snow cover and precipitation were collected with an automatic weather station and manual measurements and were further analysed. The obtained results were compared with data from previous years and with data from other stations located on King George Island. Our observations confirm that the vicinity of Arctowski Station experienced a decrease in air temperature during summer, which supports the hypothesis of regional cooling.
Go to article

Abstract

The main purpose of the presented research is to investigate the partial discharge (PD) phenomenon variability under long-term AC voltage with particular consideration of the selected physical quantities changes while measured and registered by the acoustic emission method (AE). During the research a PD model source generating surface discharges is immersed in the brand new insulation mineral oil. Acoustic signals generated by the continuously occurred PDs within 168 hours are registered. Several qualitative and quantitative indicators are assigned to describe the PD variability in time. Furthermore, some longterm characteristics of the applied PD model source in mineral oil, are also presented according to acoustic signals emitted by the PD. Finally, various statistical tools are applied for the results analysis and presentation. Despite there are numerous contemporary research papers dealing with long-term PD analysis, such complementary and multiparametric approach has not been presented so far, regarding the presented research. According to the presented research from among all assigned indicators there are discriminated descriptors that could depend on PD long-term duration. On the grounds of the regression models analysis there are discovered trends that potentially allow to apply the results for modeling of the PD variability in time using the acoustic emission method. Subsequently such an approach may potentially support the development and extend the abilities of the diagnostic tools and maintenance policy in electrical power industry.
Go to article

Abstract

In the paper, the results of investigations on the properties of acoustic emission signals generated in a tested pressure vessel are presented. The investigations were performed by repeating several times the following procedure: an increase in pressure, maintaining a given pressure level, a further increase in pressure, and then maintaining the pressure at new determined level. During the tests the acoustic emission signals were recorded by the measuring system 8AE-PD with piezoelectric sensors D9241A. The used eight-channel measuring system 8AE-PD enables the monitoring, recording and then basic and advanced analysis of signals. The results of basic analysis carried out in domain of time and the results of advanced analysis carried out in the discrimination threshold domain of the recorded acoustic emission signals are presented in the paper. In the framework of the advanced analysis, results are described by the defined by the author descriptors with acronyms ADC, ADP and ADNC. Such description is based on identifying the properties of amplitude distributions of acoustic emission signals by assigning them the level of advancement. It is shown that for signals including continoues AE or single burst AE signals descriptions of such registered signals by means of ADC, ADP and ADNC descriptors and by Upp and Urms descriptors provide identical ordering of registered acoustic emission signals. For complex signals, the description using ADC, ADP and ADNC descriptors based on the analysis of amplitude distributions of recorded signals gives the order of signals with more accurate connection with deformational processes being sources of acoustic emission signals.
Go to article

Abstract

The aim of the paper is to measure and forecast concentration of regional development potential on a regional basis. The study covered 14 GUS features, which measure the development potential. The forecast, nominal values and processes’ dynamics were calculated for data from 2010 to 2020, using author made method. The study reveals that key factors determining the diversification of the distribution of the potential include the relation of large agglomerations to their regional surroundings. Therefore, we are dealing with growth poles with different impact levels. Since 2010, the process of concentrating potential in Poland has taken different directions. In poorly developed regions, we observe constant distribution values. Most regions, especially those with medium and high levels of economic development, are characterized by a dynamic increase in the level of concentration 5% to 6% annually. This means that the growth poles «move away» from their surroundings and strengthen their position. Simultaneously, they slightly reduce the distance to the strongest developed region in Poland (Mazowsze). By 2020, these trends will remain unchanged, however regions with a moderately low level of development will observe the fastest growth.
Go to article

Abstract

There are more and more new development challenges emerging in Polish cities and regions recently. Because of those challenges we can observe an increase of the role of cities and associated environments. The concept of cities’ impact on the environment is a result of many processes, such as: suburbanization, reurbanization, increasing population mobility, development of transport systems, innovation, or entrepreneurship. A city is a complex entity, it is a subject to dynamic changes, to understand which we need interdisciplinary knowledge or the combination of many different approaches along with an attempt to draw many conclusions. We can find numerous theoretical examples describing city-regional environment relations in the literature. In general, these models explain the relationship between economically strong cities (metropolis) and the regions. However, there is not much literature and research explaining the nature and strength of relationships with medium-sized cities. There are also very few ideas for developing the potential of medium-sized cities in polish national policy. The aim of the article is to present disproportions in the development of medium-sized cities in voivodships of Eastern Poland in 2010-2017. The author will also present the possibility of using a synthetic measure to assess and recognize the spatial diversity of medium-sized cities development.
Go to article

Abstract

The article describes mine survey works during opening old St. Anthony of Padua water adit in Horní Město (Czech Republic) to make it accessible to visitors. The works cover the connecting survey and orientation measurement, traverse measurement of the first opened part, setting-out projection of the end of opened part to the surface to make shaft from the surface, new connecting survey and orientation measurement by shaft and traverse measurement of the rest of water adit. Non-standard aids and techniques were used during surveying. One of the tools is a suspended prism holder developed at Institute of geodesy and mine surveying, VSB – Technical university of Ostrava, registered as a utility patent.
Go to article

Abstract

The non-contact current measurement method with magnetic sensors has become a subject of research. Unfortunately, magnetic sensors fail to distinguish the interested magnetic field from nearby interference and suffer from gauss white noise due to the intrinsic noise of the sensor and external disturbance. In this paper, a novel adaptive filtering-based current reconstruction method with a magnetic sensor array is proposed. Interference-rejection methods based on two classic algorithms, the least-mean-square (LMS) and recursive-least-square (RLS) algorithms, are compared when used in the parallel structure and regular triangle structure of three-phase system. Consequently, the measurement range of RLS-based algorithm is wider than that of LMS-based algorithm. The results of carried out simulations and experiments show that RLS-based algorithms can measure currents with an error of around 1%. Additionally, the RLS-based algorithm can filter the gauss white noise whose magnitude is within 10% of the linear magnetic field range of the sensor.
Go to article

Abstract

The paper presents research on the capability of the residual magnetic field (RMF) measurement system to be applied to the railway inspection for the early non-destructive detection of defects. The metal magnetic memory (MMM) phenomena are analysed using normal component Hy of self-magnetic flux leakage (SMFL), and its tangential component Hx, as well as their respective gradients. The measurement apparatus is described together with possible factors that may affect the results of measurement. The Type A uncertainty estimation and repeatability tests were performed. The results demonstrate that the system may be successfully applied to detection of head check flaws.
Go to article

Abstract

The measurement of frequency characteristics, like magnitude and phase, related to a specific transfer function of DC–DC converters, can be a difficult task – especially when the measured signal approaches the boundary of a small-signal model validity (i:e. 1/3 of the switching frequency fS). It is hard to find a paper where authors mention the measurement techniques they use to draw frequency characteristics. Meanwhile the presence of noise in the output signal does not enable to directly measure the gain and the phase shift between the input and output signals. In such situations additional analysis is required in order to achieve a reliable result. This paper contains a description of a few methods that can be used to analyse measured signals in order to determine the gain and the phase shift of a specific transfer function. They enable to verify mathematical models in a wide range of frequencies (up to 1/3 fS). The methods use signals measured in the time domain and can be implemented in mathematical software such as Matlab or Scilab.
Go to article

Abstract

Acoustical Driving Forces (ADF), induced by propagating waves in a homogeneous and inhomogeneous lossy fluid (suspension), are determined and compared depending on the concentration of suspended particles. Using integral equations of the scattering theory, the single particle (inclusion) ADF was calculated as the integral of the flux of the momentum density tensor components over the heterogeneity surface. The possibility of negative ADF was indicated. Originally derived, the total ADF acting on inclusions only, stochastically distributed in ambient fluid, was determined as a function of its concentration. The formula for the relative increase in ADF, resulting from increased concentration was derived. Numerical ADF calculations are presented. In experiments the streaming velocities in a blood-mimicking starch suspension (2 μm radius) in water and Bracco BR14 contrast agent (SF6 gas capsules, 1 μm radius) were measured as the function of different inclusions concentration. The source of the streaming and ADF was a plane 2 mm diameter 20 MHz ultrasonic transducer. Velocity was estimated from the averaged Doppler spectrum obtained from originally developed pulsed Doppler flowmeter. Numerical calculations of the theoretically derived formula showed very good agreement with the experimental results.
Go to article

Abstract

The methane hazard is one of the most dangerous phenomena in hard coal mining. In a certain range of concentrations, methane is flammable and explosive. Therefore, in order to maintain the continuity of the production process and the safety of work for the crew, various measures are taken to prevent these concentration levels from being exceeded. A significant role in this process is played by the forecasting of methane concentrations in mine headings. This very problem has been the focus of the present article. Based on discrete measurements of methane concentration in mine headings and ventilation parameters, the distribution of methane concentration levels in these headings was forecasted. This process was performed on the basis of model-based tests using the Computational Fluid Dynamics (CFD). The methodology adopted was used to develop a structural model of the region under analysis, for which boundary conditions were adopted on the basis of the measurements results in real-world conditions. The analyses conducted helped to specify the distributions of methane concentrations in the region at hand and determine the anticipated future values of these concentrations. The results obtained from model-based tests were compared with the results of the measurements in realworld conditions. The methodology using the CFD and the results of the tests offer extensive possibilities of their application for effective diagnosis and forecasting of the methane hazard in mine headings.
Go to article

Abstract

This article, as far as possible based on the available literature, empirical measurements, and data from mesoscale models describes and compares expected wind conditions within the Baltic Sea area. This article refers to aspects related to the design and assessment of wind farm wind resources, based on the author’s previous experience related to onshore wind energy. The consecutive chapters of this publication are going to describe the present state and the presumptions relating to the development of wind energy within the Baltic Sea area. Subsequently, the potential of the sea was assessed using mesoscale models and empirical data from the Fino 2 mast that is located approximately 200 kilometers away from the majority of areas indicated in the Polish marine spatial development plan draft of Poland for offshore wind farm development (Maritime Office in Gdynia 2018). In the chapter describing mesoscale models, the author focused his attention on the GEOS5.12.4 model as the source of Modern-Era Retrospective Analysis for Research and Application 2 data, also known as MERRA2 (Administration National Aeronautics and Space Agency, 28), which, starting from February 2016, replaced MERRA data (Thogersen et al. 2016) and have gained a wide scope of applications in the assessment of pre-investment and operational productivity due to a remarkable level of correlation with in-situ data. Model-specific data has been obtained for eight locations, which largely overlap with the locations of the currently existing offshore wind farms within the Baltic Sea area. A significant part of this publication is going to be devoted to the description of the previously mentioned Fino 2 mast and to the analysis of data recorded until the end of 2014 by using the said mast (Federal Maritime and Hydrographic Agency 2018). The analysis has been carried out by means using scripts made in the VBA programming language, making it easier to work with large chunks of data. Measurements from the Fino 2 mast, together with long-term mesoscale model-specific measurements can be used, to some extent, for the preliminary assessment of wind farm energy yield in the areas designated for the development of renewable energy in the Polish exclusive maritime economic zone (Maritime Office in Gdynia 2018). In the final part of this article, pieces of information on the forecasted Baltic Sea wind conditions, especially within the exclusive economic zone of Poland, are going to be summarized. A major focus is going to be put on the differences between offshore and onshore wind energy sources, as well as on further aspects, which should be examined in order to optimize the offshore wind power development.
Go to article

This page uses 'cookies'. Learn more